D16Z6, theaded holes under oil filter
#1
D16Z6, theaded holes under oil filter
On the Z6, under the oil filter there are 2 threaded holes. I read through the FSM but I can't figure out if anything is supposed to go there.
Any help is appreciated.
The 2 holes are circled in red here:
Any help is appreciated.
The 2 holes are circled in red here:
#2
Honda-Tech Member
Join Date: Aug 2011
Location: Vancouver island
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Re: D16Z6, theaded holes under oil filter
I may-be mistaken but isn't the where the bracket goes to hold the exhaust up is. If not confirmed I'll check under mine after work.
#3
Seagull Management
Join Date: Jun 2008
Location: Miramichi, NB, Canada
Posts: 15,150
Likes: 0
Received 24 Likes
on
22 Posts
Re: D16Z6, theaded holes under oil filter
there's actually three, it's for an intermediate shaft, but normally you don't run an intermediate shaft on a Z6 (you'd need the uber rare Hydro ZC intermediate shaft, along with the matching axles.)
#4
Re: D16Z6, theaded holes under oil filter
The exhaust bracket is not under the oil filter. This bracket shares one bolt with the intake manifold bracket and has another one. Both bolts are on the right side of the black oil chamber box.
#5
Re: D16Z6, theaded holes under oil filter
Thank you very much.
Thread
Thread Starter
Forum
Replies
Last Post
Catch 22
Road Racing / Autocross & Time Attack
4
01-27-2002 04:22 PM