I Keep Getting CEL P0171 (lean) On My EM1
#1
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: CT, USA
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
I Keep Getting CEL P0171 (lean) On My EM1
Like The Title Says I Keep Getting A Cell On My 2000 EM1 SI. The Cell Is PO171 Reads System To Lean Bank 1. And The Car Is Bone Stock Besides Bolt Ons. If Anyone Can Help Me Figure It Out That Would Be Right.
#2
Honda-Tech Member
Re: I Keep Getting CEL On My EM1
could be low fuel pressure or clogging injectors, or could be an exhaust leak before the o2 sensor, these are guesstimates to get you on the right track
#3
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: CT, USA
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#10
Re: I Keep Getting CEL P0171 (lean) On My EM1
P0171 is a pretty common code. In tracking a few of these down, it's almost always a vacuum leak. It can be caused by inadequate fuel pressure but it's less common. I have found one of the easiest things to do is listen for an air leak with the car running.
#12
Honda-Tech Member
Join Date: Apr 2011
Location: Near Pacific Coast Highway
Posts: 1,197
Likes: 0
Received 0 Likes
on
0 Posts
Re: I Keep Getting CEL P0171 (lean) On My EM1
Sounds like a LAZY o2 sensor.
Replace the o2. 7 times outa 10 the o2 sensor is Lazy with this code.
Best of Luck
Replace the o2. 7 times outa 10 the o2 sensor is Lazy with this code.
Best of Luck
Thread
Thread Starter
Forum
Replies
Last Post