FS: OBX ITBS- Ported/Bored for GSR head
03-07-2013, 05:17 PM
#1
Honda-Tech Member
Thread Starter
Join Date: Aug 2009
Location: Baton Rouge,Louisiana
Posts: 7,635
Likes: 0
Received 3 Likes
on
3 Posts
FS: OBX ITBS- Ported/Bored for GSR head
I'm putting out a feeler for my ITB setup, it will be for sale here shortly anyway, but i wanted to get people lined up and ready because after sunday, its coming off.
This a complete, synced ITB kit from OBX. I personally Synced, and locked all the bodies. It'll be complete, minus TPS, Injectors and map. Everything is ready to bolt up, and go.
I had disassembled the kit and made sure everything was torqued, and locktited. I had a buddy of mine Keith Wilson Bore and port the flange and ITBS out. It is port matched for a hondata gasket. They were bored out to around 50ishMM's, And all the casting cleaned up.
Will come with Vac box and lines and nipples setup.
I'm asking 700 shipped, i'm located in Baton rouge, 70815.
There's nothing wrong with them, and they perform. They were on my 2.1L b20vtec, however, my motor is too big. These instantly gave 2+mph over a stock victorX manifold on my setup, after mild tuning. My hatch has ran between 109-111mph with these.
Email: Derek@DDTECHCAMS.com
Phone: 225-384-1 four four 1
This a complete, synced ITB kit from OBX. I personally Synced, and locked all the bodies. It'll be complete, minus TPS, Injectors and map. Everything is ready to bolt up, and go.
I had disassembled the kit and made sure everything was torqued, and locktited. I had a buddy of mine Keith Wilson Bore and port the flange and ITBS out. It is port matched for a hondata gasket. They were bored out to around 50ishMM's, And all the casting cleaned up.
Will come with Vac box and lines and nipples setup.
I'm asking 700 shipped, i'm located in Baton rouge, 70815.
There's nothing wrong with them, and they perform. They were on my 2.1L b20vtec, however, my motor is too big. These instantly gave 2+mph over a stock victorX manifold on my setup, after mild tuning. My hatch has ran between 109-111mph with these.
Email: Derek@DDTECHCAMS.com
Phone: 225-384-1 four four 1
Trending Topics
03-08-2013, 07:42 PM
#8
Honda-Tech Member
Thread Starter
Join Date: Aug 2009
Location: Baton Rouge,Louisiana
Posts: 7,635
Likes: 0
Received 3 Likes
on
3 Posts
Re: FS: OBX ITBS- Ported/Bored for GSR head
Port/bore work would be at least worth 200 bucks, vacbox and lines with nipples is another 50, new these can run anywhere from 600-800 and you'd still have to take the time to go through and sync everything, making sure they all open up 100%. I've already done all of that.. + made sure all the gaskets were good..
its a good setup, just isn't for me, i was doing some testing and they work well, but not what i need. Everything on the motor is custom, and the manifold will be the next thing to be setup like that.
03-09-2013, 02:10 PM
#9
Honda-Tech Member
iTrader: (3)
Join Date: Dec 2007
Location: Springfield, MO, green
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS: OBX ITBS- Ported/Bored for GSR head
Well. I can say i think i'm taking the short end of the stick honestly.
Port/bore work would be at least worth 200 bucks, vacbox and lines with nipples is another 50, new these can run anywhere from 600-800 and you'd still have to take the time to go through and sync everything, making sure they all open up 100%. I've already done all of that.. + made sure all the gaskets were good..
its a good setup, just isn't for me, i was doing some testing and they work well, but not what i need. Everything on the motor is custom, and the manifold will be the next thing to be setup like that.
Port/bore work would be at least worth 200 bucks, vacbox and lines with nipples is another 50, new these can run anywhere from 600-800 and you'd still have to take the time to go through and sync everything, making sure they all open up 100%. I've already done all of that.. + made sure all the gaskets were good..
its a good setup, just isn't for me, i was doing some testing and they work well, but not what i need. Everything on the motor is custom, and the manifold will be the next thing to be setup like that.
Thread
Thread Starter
Forum
Replies
Last Post