screeching noise back axle
#1
screeching noise back axle
Hi, I have a 1997 Integra type rs. I have a screeching noise coming from my back tire but only when I'm moving and Turing a certain degre. I cant seem to find the noise. Amy help is appreciated. My back wheel was replaced. Hit black ice bent it on a curbe. Had to get a new wheel and a hub stud was sheered right of. Not sure if its coming from this
#2
Old Fart
Join Date: May 2004
Location: kelowna, bc, canada
Posts: 26,173
Likes: 0
Received 14 Likes
on
14 Posts
Re: screeching noise back axle
Check the brake splash guard, make sure it is not loose or bent also make sure a stone or something has not got stuck between it and the disk.
Also check the bearing. 94
Also check the bearing. 94
#3
Re: screeching noise back axle
I recently checked to see if anything I could see anything rubbing around my wheel. But when I jack it up it doesn't make the noise no matter how much spin the wheel. It only makes the noise while im driving. It goes on and off when I change lanes. If get on a slightly curved road it will stop from the pressure.
Could it be a bent rotor is slightly bent?
Could it be a bent rotor is slightly bent?
#4
Old Fart
Join Date: May 2004
Location: kelowna, bc, canada
Posts: 26,173
Likes: 0
Received 14 Likes
on
14 Posts
Re: screeching noise back axle
You would think if the rotor was "bent" you would hear it all the time, even up in the air.
Does stepping on the brake a little when the noise is there change anything? 94
Does stepping on the brake a little when the noise is there change anything? 94
#5
Re: screeching noise back axle
That's a good point.
Yeah I ez on my brakes it goes awa. Its barley makes this noise as low speeds aswel.
I changes my brakes with in the last 500 miles.
Yeah I ez on my brakes it goes awa. Its barley makes this noise as low speeds aswel.
I changes my brakes with in the last 500 miles.
Thread
Thread Starter
Forum
Replies
Last Post
sSandstorm
Honda Civic / Del Sol (1992 - 2000)
4
05-20-2013 12:19 PM
vigorhy
Honda Accord (1990 - 2002)
3
03-20-2008 03:54 PM