2001 v6 axle nut removal?
02-26-2005, 04:39 PM
#1
Working
Thread Starter
2001 v6 axle nut removal?
I cannot seem to get the axle nut loose and I don't know if it is reverse thread or regular thread. Any help would be appreciated.
02-26-2005, 04:48 PM
#2
Honda-Tech Member
Re: 2001 v6 axle nut removal? (-RedneckDave-)
4cyl is lefty loosey. Not sure if it is different.
I had to put a breaker bar on it and a 5 foot pipe on the end and move real slow. Came right off. Dunno if this helps.
I had to put a breaker bar on it and a 5 foot pipe on the end and move real slow. Came right off. Dunno if this helps.
02-26-2005, 04:48 PM
#3
Working
Thread Starter
Re: 2001 v6 axle nut removal? (-RedneckDave-)
Never mind I hope it is the same as an older accord cause those are righty tighty lefty loosy
Well I broke my breaker bar with my extension on it
and my impact is not doing a damn thing.
Well I broke my breaker bar with my extension on it
and my impact is not doing a damn thing.
Thread
Thread Starter
Forum
Replies
Last Post
RCautoworks
Honda CRX / EF Civic (1988 - 1991)
48
11-27-2006 12:26 AM
