crank position sensor keeps going bad?
#1
Member
Thread Starter
Join Date: Feb 2004
Location: Portland Oregon/Tampa Fl
Posts: 2,186
Likes: 0
Received 0 Likes
on
0 Posts
crank position sensor keeps going bad?
Hey guys so this is the second distributor that i have had the crank position sensor go bad on what could cause this in my motor? I believe its a bad product but i cant prove it i dont feel that a cps is going keep going bad in my motor.
Thanks
Spence
Thanks
Spence
#6
Honda-Tech Member
Join Date: Dec 2005
Location: Panama, Panama
Posts: 3,548
Likes: 0
Received 0 Likes
on
0 Posts
if the motor is obd2 the crank sensor is located behind the crank pulley.
obd1 you dont need this sensor.
Inside the distributor you have the cam sensor
obd1 you dont need this sensor.
Inside the distributor you have the cam sensor
Trending Topics
#8
Member
Thread Starter
Join Date: Feb 2004
Location: Portland Oregon/Tampa Fl
Posts: 2,186
Likes: 0
Received 0 Likes
on
0 Posts
Neal i dont live in tampa anymore
The motor is obd1 and it through this code only once the other day for the first time since the new dissy this car is not a daily driver now its pretty much a maybe once a week drove car. But everytime it throws this code it goes into limp mode which is very annoying. Neal do you think it maybe wiring? You remember my white hatch that had that torn up wires under the dash. maybe you have a dash harness laying around for a eg
hope this helps
The motor is obd1 and it through this code only once the other day for the first time since the new dissy this car is not a daily driver now its pretty much a maybe once a week drove car. But everytime it throws this code it goes into limp mode which is very annoying. Neal do you think it maybe wiring? You remember my white hatch that had that torn up wires under the dash. maybe you have a dash harness laying around for a eg
hope this helps
#10
Honda-Tech Member
Join Date: Apr 2004
Location: Tampa, FL, USA
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
Re: crank position sensor keeps going bad? (Spence)
check the blu/green& blu/yel wires at B15 and B16(B is middle plug...these wires are on the end) at the ecu....also same color wires at the dizzy plug. hope this helps some
Thread
Thread Starter
Forum
Replies
Last Post