AT trans slipping / Po730 code - wrong gear ratio after gets warmed up
02-17-2007, 12:10 PM
#1
Thread Starter
Join Date: Feb 2007
Location: San Leandro, ca, USA
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
AT trans slipping / Po730 code - wrong gear ratio after gets warmed up
2001 Civic EX with 130,000 miles on it. Fluid flushed once at 75k. Trans slips excessivly and pulls a P0730 code. Fluid is brnt
Any hope ?
Thanks in advance
P.S. Looks like maybe a trans is in order - if so - DOes anyone have a good line on transmissions. Honda is on back order with no light in sight.
I always thought Hondas were bulletproof and have worked on many over the years - never seen a trans go out at 130k - why me ?
Any hope ?
Thanks in advance
P.S. Looks like maybe a trans is in order - if so - DOes anyone have a good line on transmissions. Honda is on back order with no light in sight.
I always thought Hondas were bulletproof and have worked on many over the years - never seen a trans go out at 130k - why me ?
02-17-2007, 12:52 PM
#2
Schumacher '10 WDC
Join Date: Sep 2006
Posts: 1,747
Likes: 0
Received 0 Likes
on
0 Posts
Re: AT trans slipping / Po730 code - wrong gear ratio after gets warmed up (hondarsw)
I have heard so many complaints about the automatic transmission in the '01 civic's its not even funny. Luckily I drive manual. By fluid burnt I assume its black or very dark? I am not a transmission expert but your guess sounds right. You could take it to a transmission repair place, and have them disassemble and reassemble it, but that will cost you loads, sorry. More will chime in don't worry.
PS. Welcome
PS. Welcome
Thread
Thread Starter
Forum
Replies
Last Post
1yesfan
Honda Accord (1990 - 2002)
4
03-12-2015 02:31 PM
lovedam
Honda Accord & Crosstour (2003 - 2012)
3
09-09-2011 04:21 PM
