how to install RED H emblem
01-16-2008, 03:36 AM
#4
Honda-Tech Member
Join Date: Sep 2001
Location: Strasburg, VA, USA
Posts: 3,986
Likes: 0
Received 0 Likes
on
0 Posts
Re: (c_mack9)
peel them off, then use WD40 to remove the adhesive. you can use WD40 and dental floss to get them off, too. works a little better than just peeling. make sure it's the waxed dental floss, though.
01-18-2008, 06:30 AM
#6
Junior Member
Join Date: Jul 2007
Location: corona, ca, united states
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
Re: how to install FIT type r emblem (jdmda7)
use a heat gun to heat up the emblem and then peel it off 
i used a credit card for mine but a heat gun is better...
i used a credit card for mine but a heat gun is better...
01-18-2008, 11:52 AM
#7
Re: how to install FIT type r emblem (JRRR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JRRR »</TD></TR><TR><TD CLASS="quote">use a heat gun to heat up the emblem and then peel it off i used a credit card for mine but a heat gun is better...</TD></TR></TABLE>
I used a credit card and it worked for me.
i used a credit card for mine but a heat gun is better...</TD></TR></TABLE>I used a credit card and it worked for me.
Trending Topics
01-18-2008, 11:56 AM
#8
Honda-Tech Member
Join Date: Jul 2006
Location: Hell, Ca, USA
Posts: 1,360
Likes: 0
Received 0 Likes
on
0 Posts
Re: how to install FIT type r emblem (eL)
01-19-2008, 05:15 PM
#9
Join Date: Sep 2004
Location: Simsbury, CT, USA
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Re: how to install FIT type r emblem (fitfreak3)
why would you use a heat gun on the stock emblems? theres no adhesive holding the stock H badges to the fit...
for the back look up behind the rear hatch handle on the outside and you'll see 2 tabs sticking in from the outside, break them off and the emblem comes off very easily
the front use a credit card and pry it out, the credit card won't harm the black grill material
for the back look up behind the rear hatch handle on the outside and you'll see 2 tabs sticking in from the outside, break them off and the emblem comes off very easily
the front use a credit card and pry it out, the credit card won't harm the black grill material
01-20-2008, 05:37 PM
#10
Junior Member
Join Date: Jul 2007
Location: corona, ca, united states
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
Re: how to install FIT type r emblem (yeamans17)
yeah well i used a heat gun to take the type r ones off, becuase there is no type r fit so i just put the stock ones back on cause i painted them black...they look pretty hard...
01-23-2008, 07:41 AM
#12
Honda-Tech Member
Join Date: Jul 2006
Location: Hell, Ca, USA
Posts: 1,360
Likes: 0
Received 0 Likes
on
0 Posts
Re: how to install FIT type r emblem (yeamans17)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by yeamans17 »</TD></TR><TR><TD CLASS="quote">why would you use a heat gun on the stock emblems? theres no adhesive holding the stock H badges to the fit...
</TD></TR></TABLE>
I think he was referring to the FIT emblem and not the H emblem.
</TD></TR></TABLE>
I think he was referring to the FIT emblem and not the H emblem.
Thread
Thread Starter
Forum
Replies
Last Post
LOWLIFEHATCH
Honda / Acura
4
02-17-2003 12:02 PM
