Cam gear removal
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2005
Location: Northwest ID, ID, USA
Posts: 1,177
Likes: 0
Received 0 Likes
on
0 Posts
Cam gear removal
Well I am about to replace my cam seal. How do i hold the cam while i break loose the bolt holding the cam gear onto the camshaft ? I know i could use an impact but i know that is not the proper way.
#2
I've always left the timing belt on and the plugs in. engine compression has always been enough to hold it to break the bolt free. If the timing belt is off, then hold the cam gear still with a strap wrench.
Thread
Thread Starter
Forum
Replies
Last Post