amej8

Just got my asr subframe brace for my 99 ex coupe in the mail today (that means it doesn't have the stock backing plates behind the subframe like the Si does). I went to look for a How-To but the only one I could find was the one on PW:JDM. But it can't be the right one because the subframe brace itself looks different from the pictures. And it doesn't say what to do with the other parts that I got along with the brace.

Here's what I got:


I think I have a rough idea on how to install it but I'm still confused as to use what bolts where.

Input?

BlueIntegraBoy

iTrader: (5)

http://www.passwordjdm.com/Install_N...R_Brace_EK.pdf

k1llak973

bump nice hardware

NismoTyler

Thanks for the link. My brace came with a sticker instead of instructions

Ruben19

my asr subframe is a bit different. i was able to use my stock lower control arm bolts.
i guess i have the new asr subframe design

98civdx

The new designs allows you to use stock bolts

NismoTyler

stock bolts ftw!

cvcrcr99

Google.com would be a nice thing to use as well. This probably has been covered like 8,000 times.

xero_xero

bump for some clean hardware. can we get some comparison pics of the new and old design?

NismoTyler

New Design

xero_xero

props, what brand LCAs are those?

NismoTyler

pershiate it man the LCAs are Blox but the logo is so thin it didn't show up in the photos

PSU

iTrader: (2)

Not necessarily.

Vindicator9000

The new style brace is different from the one in the instruction manual that was posted. The old style didn't have the L brackets, because the entire thing was cut out of one solid piece of aluminum. I imagine the new style is much cheaper and easier to produce, and would have less waste.

Basically, you use the hex bolts to attach the L-shaped pieces to the back of the brace.

Then, you remove the LCA bolts, line the brace up, and put the LCA bolts back in. Then line up the little backing plates and put the other bolts in. Keep in mind that they're different lengths... that tripped me up at first.

It's actually not a very difficult install, especially if you have an impact driver for the LCA bolts.

Please tell me you have a swaybar for this, and you're not just installing the brace by itself.

kristo

Bringing this up

This would refer to the 'first' brace (EK-RB-01 for EK), the commonly known model like OP has (EK-RB-02) also features separate L-brackets.


Was this new design announced somewhere? I surely missed it.