94 accord CV axle removal?
01-14-2010, 09:24 AM
#1
Junior Member
Thread Starter
Join Date: Apr 2007
Location: Windsor, CT, U.S.A
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
94 accord CV axle removal?
So I took the lower ball joints and everything Im trying to pull out the CV axle right now. Problem is its not budging and it looks like the rubber boot is stretching. Is there a proper technique to pull them out?
01-14-2010, 11:27 AM
#2
Honda-Tech Member
Join Date: Aug 2007
Location: Pcola, Florida
Posts: 1,110
Likes: 0
Received 0 Likes
on
0 Posts
Re: 94 accord CV axle removal?
if outer joint is disconnected from the rotor hub aseembly then the inner joint that goes into the transmission needs to be pryed out between the joint and tranny.
01-15-2010, 09:42 AM
#3
Junior Member
Thread Starter
Join Date: Apr 2007
Location: Windsor, CT, U.S.A
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Re: 94 accord CV axle removal?
Im trying to remove the inner joint on the half shaft from the intermediate shaft or support shaft. Even with a pry bar its still not coming out.
Thread
Thread Starter
Forum
Replies
Last Post
Pochtecatl
Honda Accord (1990 - 2002)
3
07-11-2004 11:43 AM
1996, 2007, 94, accord, axle, boot, cv, half, honda, intermediate, joint, management, project, removal, replacement, shaft, transmission
