JDMJunkie08

once again guys i have the D16Y7.... i hear i can make it Vtec.... what car does the Vtec head i need come from ?? and is it a direct fit to the D16 block ?

kaiba

Use head from D16Y8 96-00 EX or D16Z6 92-95 Si/EX

Skunk2Joe

https://honda-tech.com/forums/honda-civic-del-sol-1992-2000-1/how-use-honda-tech-search-engine-2588951/

thought I would help before you get flamed or this thread gets closed.

JDMJunkie08

thanks . would you know which would be better ?

kaiba

No. But search "mini me".

JDMJunkie08

lol i know lol i just like direct answer's. and also tried and couldnt find anything on it so i just posted a thread lol much easier in my opinion

JDMJunkie08

that 's with the D15 block and Vtec head... or does that go for the D16 as well ?

JDMJunkie08

okay i searched mini me. even though i knew about it lol thats kinda what i was leading to .. also did some side research for which head to use and the D16Y8 seems better.... and i know this sound like im retarded for asking but no harm in making sure.... you never know lol but does the D16Y8 head bolt directly onto the D16Y7.... i know it does but is there anything i should be aware of before doing so ?

grumblemarc

iTrader: (4)

Did any of the write ups say that it DIDN'T bolt up?

JDMJunkie08

no none said it didnt.... so my guess is thats a way for you to tell me that yes it does bolt up lol

apexi_rsx

i personally think the z6 head is better. when boosting its easier to tune. y8 head raises compression and does not like alot of advanced timing. its all in preference which one u like. you can run a p28 and a jumper harness or run a p2p civic ex ecu,knock sensor,and you will need to wire vtec on both ecus. many of mini me write ups just search google.