obd1 codes
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2003
Location: GTA Ontario.
Posts: 3,540
Likes: 0
Received 0 Likes
on
0 Posts
obd1 codes
Today my buddy came over and hes wanted to hear what my exhaust sounded like.
Anyways it was very damp out and the motor was cold, it was a bit above freezing, and i reved my cold engine to 6k, when i let off it dropped down bogged then died.
After 2 minutes of sitting it runs fine but im getting a code.
Its a obd1 P28 Ecu, it goes blink......blink......blink..blink. 2 long blinks then 2 short ones.
Anyone know what this means so i can fix whatever it is?
Thanks alot!
-Eric
Anyways it was very damp out and the motor was cold, it was a bit above freezing, and i reved my cold engine to 6k, when i let off it dropped down bogged then died.
After 2 minutes of sitting it runs fine but im getting a code.
Its a obd1 P28 Ecu, it goes blink......blink......blink..blink. 2 long blinks then 2 short ones.
Anyone know what this means so i can fix whatever it is?
Thanks alot!
-Eric
#2
Honda-Tech Member
Join Date: Apr 2003
Location: Kona/V-town, HI
Posts: 2,776
Likes: 0
Received 0 Likes
on
0 Posts
Re: obd1 codes (HamiltonRex)
first i would try and reset the ecu and see if you still get that code
variable vavle timing and valve lift electronic control pressure switch( vtec pressure switch)
variable vavle timing and valve lift electronic control pressure switch( vtec pressure switch)
#5
Re: obd1 codes
i have a obd1 h22a p13 ecu and i swap the h22a obd1 in my 1992 honda accord ex wagon what wire do i have to conect to hook up the vtek is it the vtek solenoid and the knock senssor duzz eny one know what i need to do
Thread
Thread Starter
Forum
Replies
Last Post