Notices
Tech / Misc Tech topics that don't seem to go elsewhere.

1992 CX running at 3 cylinders

Thread Tools
 
Search this Thread
 
Old 01-20-2015, 08:57 AM
  #1  
Honda-Tech Member
Thread Starter
 
lsvtec801's Avatar
 
Join Date: Jan 2015
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default 1992 CX running at 3 cylinders

I just bought this car and he told me it's probably spark plugs. Well I took the chance and bought it any ways. I went and bought new spark plugs and the car starts up better but still running on 3 cylinders. I know that because I pulled the spark plug wires off one by one and on the 2nd on starting from the driver side the motor didn't do anything. All the other ones the motor wanted to die. After I did spark plugs I did the wires and still nothing. I've heard it could be cap and rotter. I went and bought those last night and I'm going to change them out on my lunch break. I hope this fixes the problem. Does anyone else know what else it could be?
Old 01-20-2015, 09:27 AM
  #2  
Honda-Tech Member
iTrader: (2)
 
danteisme's Avatar
 
Join Date: Jul 2003
Location: South Western PA
Posts: 3,167
Received 43 Likes on 39 Posts
Default Re: 1992 CX running at 3 cylinders

could be distributor, could be bad compression in that cylinder
Old 01-20-2015, 09:39 AM
  #3  
Honda-Tech Member
Thread Starter
 
lsvtec801's Avatar
 
Join Date: Jan 2015
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 1992 CX running at 3 cylinders

yeah it's crazy because all the other cylinders work. I hope it just the cap and rotter. I guess I will know here in about an hr. I'll keep you posted.
Old 01-20-2015, 11:11 AM
  #4  
Honda-Tech Member
Thread Starter
 
lsvtec801's Avatar
 
Join Date: Jan 2015
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 1992 CX running at 3 cylinders

yeah so I just swapped out my distributor cap and still nothing. I couldn't get the rotter off even after I unscrewed the screw for it. It's really on there. The rotter looks fine though but who knows. I bought the plugs, and wires from like an autozone type store so I wonder if the wires don't work. I can pull three wires off and the motor will want to die but when I pull the other one nothing. That's how I know that one cylinder doesn't work.
Old 01-20-2015, 11:24 AM
  #5  
Honda-Tech Member
iTrader: (2)
 
danteisme's Avatar
 
Join Date: Jul 2003
Location: South Western PA
Posts: 3,167
Received 43 Likes on 39 Posts
Default Re: 1992 CX running at 3 cylinders

is there any oil down in the spark plug chamber? maybe causing it to not get spark?
Old 01-20-2015, 12:03 PM
  #6  
Honda-Tech Member
Thread Starter
 
lsvtec801's Avatar
 
Join Date: Jan 2015
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 1992 CX running at 3 cylinders

I haven't checked yet. What would cause oil to go down in there if there is? Valve cover gasket?
Old 01-20-2015, 12:04 PM
  #7  
Honda-Tech Member
Thread Starter
 
lsvtec801's Avatar
 
Join Date: Jan 2015
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 1992 CX running at 3 cylinders

I put new spark plug in it right at the shop and started it up and it didn't run at all. You think it would and then if it got oil on it then it wouldn't run. I'm going to check my spark plug wire with a volt meter and see what it reads out.
Old 01-20-2015, 03:51 PM
  #8  
The Grumpiest
iTrader: (4)
 
grumblemarc's Avatar
 
Join Date: May 2008
Location: Oak Ridge, TN, USA
Posts: 28,333
Likes: 0
Received 17 Likes on 16 Posts
Default Re: 1992 CX running at 3 cylinders

Stop pulling plug wires with the engine running before you blow the coil. I'm surprised you haven't already.
Old 01-21-2015, 01:18 AM
  #9  
Technical Hero
 
HondaPartsHero's Avatar
 
Join Date: May 2002
Location: Charlotte, NC, 28227
Posts: 9,876
Likes: 0
Received 28 Likes on 20 Posts
Default Re: 1992 CX running at 3 cylinders

Compression test that thing
Old 01-21-2015, 06:52 AM
  #10  
Honda-Tech Member
 
LTCxD2B's Avatar
 
Join Date: Nov 2009
Posts: 389
Likes: 0
Received 0 Likes on 0 Posts
Default

Check ur injectors .... If the spark plug U pulled out smells like gas or has oil all over it then u need a motor
Old 01-21-2015, 08:13 AM
  #11  
Honda-Tech Member
iTrader: (2)
 
danteisme's Avatar
 
Join Date: Jul 2003
Location: South Western PA
Posts: 3,167
Received 43 Likes on 39 Posts
Default Re: 1992 CX running at 3 cylinders

Originally Posted by LTCxD2B
Check ur injectors .... If the spark plug U pulled out smells like gas or has oil all over it then u need a motor
not necessarily a new motor if its oil. the "o-ring" gaskets that come with the valve cover gasket for the spark plug chambers could be bad. but if it's not that, yeah that probably means it is coming from something worse/more expensive.
Old 01-21-2015, 11:14 AM
  #12  
Honda-Tech Member
 
LTCxD2B's Avatar
 
Join Date: Nov 2009
Posts: 389
Likes: 0
Received 0 Likes on 0 Posts
Default

I Meant like burnt oil on the tip of the spark plug ... A dead cylinder usually has it all caked up on the spark plug tip
Old 02-09-2015, 08:05 AM
  #13  
Honda-Tech Member
Thread Starter
 
lsvtec801's Avatar
 
Join Date: Jan 2015
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default Re: 1992 CX running at 3 cylinders

yeah I did a compression test. Cylinder 2 has 30 for compression so I need a new motor. Look like I'll just be driving this around till the motor actually goes. I'll probably just order a new home off jsmotors.com or something. I would like to order a gsr swap but I guess I'll just have to see when my motor blows and what I have for cash for it.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
97civic07gsxr
Honda Civic / Del Sol (1992 - 2000)
10
04-06-2009 07:16 AM
civicxxman
Honda CRX / EF Civic (1988 - 1991)
5
04-27-2008 01:52 PM
ls19integra95
Acura Integra
9
04-15-2007 11:40 AM
SonicBluDC2
Acura Integra
4
03-30-2007 08:12 AM
Tofurky
Hybrid / Engine Swaps
9
09-16-2002 10:06 PM



Quick Reply: 1992 CX running at 3 cylinders



All times are GMT -8. The time now is 12:22 AM.